Gwyn Lewis 4x4 Suspension Equipment for Discovery 1
139,39€
Pre-order Product Code: GL1051
These turrets are designed specifically for the Gwyn Lewis challenge suspension kit and to be used w..
62,21€
Pre-order Product Code: GL1053
These turret securing rings are made out of 6mm mild steel and are zinc plated, they have 8.8 grade ..
171,65€
Pre-order Product Code: GL1056
These turrets are standard height, they are made from 6mm steel, you can fit standard length shocks ..
119,81€
Pre-order Product Code: GL1057B-2
Overall Height 83mm.
These Bump Stops are universal fitment, the mounting plate is a heavy duty 5mm..
119,81€
Pre-order Product Code: GL1057Y-2
These Bump Stops are universal fitment, the mounting plate is a heavy duty 5mm plate with 6 mounting..
125,57€
Pre-order Product Code: GL1058
These Rear Shock Mounts are our challenge suspension top shock mounts, they are GALVANIZED to prolon..
155,98€
Pre-order Product Code: GL1059
These ones have been dressed after galvanising and then powder coated BLUE.
These Rear Shock Mounts..
163,58€
Pre-order Product Code: GL1061
These Rear Shock Mounts are our Extra Heavy Duty challenge suspension 2 Position top shock mounts, t..
209,66€
Pre-order Product Code: GL1062
These ones have been dressed after galvanising and then powder coated BLUE.
These Rear Shock Mounts..
133,63€
Pre-order Product Code: GL1064
These rear spring re-locators were designed by me many years ago for our challenge suspension and fo..
50,69€
Pre-order Product Code: GL1068
These are to hold down the rear spring onto the axle spring seat, They are bent on both ends to lock..
82,94€
Pre-order Product Code: GL1070
These spring retainers will clamp the spring more securely than the flat bar type retainers (which c..
368,64€
Pre-order Product Code: GL1073
They are a must have for any Land Rover that is used off road, as the standard arms are just not str..
368,64€
Pre-order Product Code: GL1074
*NOTE* These are Powder Coated BLUE and are CRANKED.
They are a must have for any Land Rover that i..
299,52€
Pre-order Product Code: GL1075
These are our DIY rear arms, they are fully welded and have the rear bush pressed into them, all you..
Bestsellers
85,00€
Ventilation Hood Cover and Windshield Wiper for Land Rover Discovery 2The ventilation hood cover and..
1,32€
FTC4919 - Rear Hub Seal for Land Rover Discovery 2Application: Installed on the rear axle of the car..
13,80€
Seal front and rear propshaft for Discovery 2Seal front and rear propshaft - an integral part of the..
Latest
250,00€
Repair arch of the rear right wing Jaguar XK8 / XKR X100 - steel repair section of the rear right wh..
1 500,00€
Left rear fender Jaguar XK8 / XKR X100The part is made of 1.2mm sheet steel by a company with extens..
1 500,00€
Right rear wing Jaguar XK8 / XKR X100The part is made of 1.2mm thick sheet steel by an experienced c..
250,00€
Threshold overlay (right side) for the body of Jaguar XK8 and XKR X100 generation.Made of 1.2mm shee..
250,00€
Right body sill cover panel for Jaguar XK8 and XKR X100 generation.Made of 1.2mm sheet steel by a co..
700,00€
Full repair panel of the left body sill for Jaguar XK8 and XKR generation X100.Made of 1.2mm sheet s..
700,00€
complete repair panel for the right body sill for Jaguar XK8 and XKR of the X100 generation. Made of..
500,00€
LNC1800AAP1 - Alternating current generator 120 amperes..
25,00€
Spare Bushing Set for OMESD32 DamperThis spare bushing set is designed to replace damaged bushings o..
140,00€
Reinforced Steering Rod Defender 90/110/130The steering rod is one of the key elements of the car st..
If you have any questions, you can contact our managers in any convenient way for you. 




























