FRC8767 - Clevis Pin for Link Rod on Transfer Box with LT77 Gearbox - Land Rover Defender, Discovery 1 and Range Rover Classic (Part Number: FRC8767)
Cylindrical finger of the transfer box linkage rod clevis pin for Land Rover.
This pin is a critically important axis physically connecting the elements of the linkage rod together. It works in conjunction with a splined retainer (FRC8548) that prevents it from popping out.
Main features and applications:
- Purpose: Serves as a pivot point for the selection of gear ranges and differential lock linkage rods. It provides a movable connection of the lever with the transfer mechanism.
- Compatibility with gearbox: Most commonly used on models where the LT230 transfer box is paired with a 5-speed manual LT77 gearbox.
Compatibility with models:
- Land Rover Defender 90 / 110 (classic models up to 2006).
- Discovery 1 (1989–1999).
- Range Rover Classic.
Why is it replaced?
Since the linkage is located under the vehicle and is exposed to sand and dirt, abrasive wear occurs in the connection of the finger with the rods. Deep grooves (steps) appear on the finger itself. This leads to significant play in the transfer lever in the cabin or unclear engagement of gears (difficult to engage low range or lock the differential).
Usually, during the linkage mechanism overhaul, a complete set is purchased: new rods, rubber bush FRC6872, retaining plate FRC6873, a pair of such pins FRC8767 and new splines for them to completely eliminate play and restore factory clarity of shifting.
| Product Details | |
|---|---|
| Part Number: | FRC8767 |
If you have any questions, you can contact our managers in any convenient way for you. 