FTC382 - Hub and Sleeve Assembly Hi-Low Gear for Transfer Box on Defender (with LT77) and Discovery 1 (Suffix E, F & G) (Part Number: FTC382)
Hi/Lo Selector Hub and Sleeve Assembly for LT230 Land Rover Transfer Case
Unlike the small components of the linkage (rods and splines), this assembly is located inside the transfer case itself. When you move the lever in the cabin forward or backward, the selector fork moves this sleeve, which engages the corresponding gears on the inner hub, switching the transmission between High and Low modes.
Main features and compatibility:
- Application: LT230 transfer cases starting from serial number XXD226636E (suffixes E, F, and G).
- Design feature: This kit is designed for a central differential with a smaller 54 mm spline connection.
Compatibility with models:
- Land Rover Defender (1987–2006, mainly with engines 200Tdi, 300Tdi, V8, except Td5 and TDCi versions).
- Discovery 1 (1989–1999).
- Range Rover Classic.
Important note: This sleeve is NOT suitable for Defender Td5, Defender TDCi (Puma), and Discovery 2 Td5/V8 vehicles. For these later models with reinforced differentials, a different part number - FTC5099 is used.
Reasons for replacement:The assembly is designed for high loads, but over time, the internal splines of the hub or the teeth of the sleeve wear out.
Most common symptoms of malfunction: Engagement of High or Low gear under load (when pressing the gas or engine braking).
| Product Details | |
|---|---|
| Part Number: | FTC382 |
If you have any questions, you can contact our managers in any convenient way for you. 