Gwyn Lewis 4x4 Suspension Equipment
178.80€
Pre-order Product Code: GL1050
These turrets are for our challenge suspension kit and to be used when fitting our + 5.5 inch, 11 in..
139.39€
Pre-order Product Code: GL1051
These turrets are designed specifically for the Gwyn Lewis challenge suspension kit and to be used w..
62.21€
Pre-order Product Code: GL1053
These turret securing rings are made out of 6mm mild steel and are zinc plated, they have 8.8 grade ..
57.60€
Pre-order Product Code: GL1054
These are heavy duty spring retainers, designed to hold down the front spring on its seat when used ..
171.65€
Pre-order Product Code: GL1056
These turrets are standard height, they are made from 6mm steel, you can fit standard length shocks ..
119.81€
Pre-order Product Code: GL1057B-2
Overall Height 83mm.
These Bump Stops are universal fitment, the mounting plate is a heavy duty 5mm..
119.81€
Pre-order Product Code: GL1057Y-2
These Bump Stops are universal fitment, the mounting plate is a heavy duty 5mm plate with 6 mounting..
125.57€
Pre-order Product Code: GL1058
These Rear Shock Mounts are our challenge suspension top shock mounts, they are GALVANIZED to prolon..
155.98€
Pre-order Product Code: GL1059
These ones have been dressed after galvanising and then powder coated BLUE.
These Rear Shock Mounts..
163.58€
Pre-order Product Code: GL1061
These Rear Shock Mounts are our Extra Heavy Duty challenge suspension 2 Position top shock mounts, t..
209.66€
Pre-order Product Code: GL1062
These ones have been dressed after galvanising and then powder coated BLUE.
These Rear Shock Mounts..
133.63€
Pre-order Product Code: GL1064
These rear spring re-locators were designed by me many years ago for our challenge suspension and fo..
144.00€
Pre-order Product Code: GL1065
These rear spring re-locators were designed by me many years ago for our challenge suspension and fo..
50.69€
Pre-order Product Code: GL1068
These are to hold down the rear spring onto the axle spring seat, They are bent on both ends to lock..
52.80€
Pre-order Product Code: GL1069
These rear spring re-locators were designed by me many years ago for our challenge suspension and fo..
Bestsellers
85.00€
Ventilation Hood Cover and Windshield Wiper for Land Rover Discovery 2The ventilation hood cover and..
1.32€
FTC4919 - Rear Hub Seal for Land Rover Discovery 2Application: Installed on the rear axle of the car..
13.80€
Seal front and rear propshaft for Discovery 2Seal front and rear propshaft - an integral part of the..
Latest
220.00€
Repair panel wing Jaguar XK8 / XKR X100 (rear right side)Repair panel of the lower rear part of the ..
250.00€
Repair arch of the rear left wing Jaguar XK8 / XKR X100This is a steel repair section of the rear ri..
250.00€
Repair arch of the rear right wing Jaguar XK8 / XKR X100 - steel repair section of the rear right wh..
1 500.00€
Left rear fender Jaguar XK8 / XKR X100The part is made of 1.2mm sheet steel by a company with extens..
1 500.00€
Right rear wing Jaguar XK8 / XKR X100The part is made of 1.2mm thick sheet steel by an experienced c..
250.00€
Threshold overlay (right side) for the body of Jaguar XK8 and XKR X100 generation.Made of 1.2mm shee..
250.00€
Right body sill cover panel for Jaguar XK8 and XKR X100 generation.Made of 1.2mm sheet steel by a co..
700.00€
Full repair panel of the left body sill for Jaguar XK8 and XKR generation X100.Made of 1.2mm sheet s..
700.00€
complete repair panel for the right body sill for Jaguar XK8 and XKR of the X100 generation. Made of..
500.00€
LNC1800AAP1 - Alternating current generator 120 amperes..
If you have any questions, you can contact our managers in any convenient way for you. 




























