DA9200 - Defender 90 Intelliride Airbag Kit (Part Number: DA9200.G)

Defender 90 Height Range Automatic Mode         Front    Rear   Ride Height up to Raised Height         40mm    40mm    Ride Height down to Access Height   -80mm    -80mm    Height Range Manual Mode Maximum Height from Ride Height      50mm    50mm  Minimum Height from Ride Height     -100mm    -100mm Why Intelliride ECAS?This front and rear axle full air suspension kit incorporates on-board air control which is a fully automatic Electronically Controlled Air Suspension (ECAS) System. When fitted, the system provides comfort while maintaining a programmed ride height irrespective of the load. Multiple vehicle heights are available at the push of a button.  The on-board system has automatic load levelling at each height which continuously monitors inputs and component performance as a means of increasing safety and durability. The on-board system recognises and responds accordingly to potholes, cross-articulation and extended turns. This intelligence prevents unnecessary activity and air consumption, it even recognises unachievable heights, assisting in the prevention of possible damage above or below the vehicle.  Features> Automatic 4 corner ride heigh control catering for all loads> 3 pre-set heights - high, drive & low mode> Fully adjustable via easy to use hand held control>  Front to back levelling> Raise for clearance> Lower for storage and access> Inputs available for safety reset to ride height> Manual mode> Horizon levelling feature option> OEM grade components for reliable performance> High volume air springs for optimal ride quality & carrying capacity Benefits> Easy installation> Excellent ride quality> Headlights point in the right direction> Adjustable levelling control> Prevents bottoming out> Stabilise body roll> Reduces tyre wear> Lowers maintenance costs> Safer load carrying> Better braking> Improved steering & handling Core Components > Rear Firestone air springs - heavy-duty rolling sleeve air springs. > Front Dunlop air springs - heavy-duty rolling sleeve air springs includes shock relocation brackets > AMK air compressor - 12 volt. Max 150 psi working pressure, high quality German built compressor. > 1 Gallon seamless aluminium air tank - SAE J10 APPROVED, lightweight & no corrosion. Max. working pressure 200psi. Pressure tested to 1,000psi. 3 x ¼” NPT ports (including drain port). Multi-position low profile bracket set > Hand held controller - 9m lead > ECU & valve block > Vehicle specific air supply mounting brackets > Rocker switch & height sensors > 6mm high quality nylon tubing> Quick fit push to connect air fittings> Easy to use electrical connections> Sealed relay & harness> Hardware> Step by step instructions> Operators manual