Power steering pumps for Land Rover Defender 1986-2016

Power Steering Pumps for Land Rover Defender 1986–2016

Power steering pumps for Land Rover Defender 90, 110, and 130 from 1990 to 2016. The catalog includes power steering pumps, repair kits, seals, pulleys, drive belts, reservoirs, and ready-made kits for repairing the Defender power steering system with engines 200Tdi, 300Tdi, TD5, Puma 2.4/2.2, and V8.

Original Land Rover parts, OEM components, and quality aftermarket alternatives are available. For accurate pump selection, we recommend checking the VIN, engine type, year of manufacture, and OEM number of the installed part.

Power Steering Pump for Defender

The power steering pump creates the necessary pressure in the hydraulic system and ensures the operation of the power steering. Due to differences between Defender generations, one pump does not fit all vehicles.

In the Britpart catalog, you can find pumps and components for:

• Defender 200Tdi;

• Defender 300Tdi;

• Defender TD5;

• Defender Puma 2.4 TDCi;

• Defender Puma 2.2 TDCi;

• petrol and V8 versions of the Defender.

In addition to the pump, during repairs, sealing rings, drive belts, pulleys, power steering fluid reservoirs, or high and low-pressure hoses may be needed.

Power Steering Pump for Defender TD5

For Land Rover Defender with the TD5 engine, the catalog includes the QVB101350 pump, its components, and ready kits for replacement.

When replacing the pump, the vehicle's equipment must be taken into account. In particular, the drive belt differs in Defenders with and without air conditioning, so when repairing the system comprehensively, it is important to correctly select not only the pump itself.

Power Steering Pump for Defender 300Tdi

For Defender 300Tdi, both individual system components and ready kits including the pump and corresponding power steering hoses are available.

This option is advisable for comprehensive system repairs when the power steering pump is worn or damaged along with the power steering lines.

Power Steering Pump for Defender Puma 2.4 and 2.2

The Defender Puma was produced with engines 2.4 TDCi and 2.2 TDCi, so when ordering a pump, it is necessary to check the specific modification and VIN of the vehicle.

The catalog includes power steering pumps, reservoirs, seals, and other components of the steering system for the Puma.

Signs of Power Steering Pump Malfunction

Checking the pump and power steering system is necessary if:

• the steering wheel has become noticeably heavier;

• the power assistance works unevenly;

• a strange noise appears when turning the steering wheel;

• there are visible signs of power steering fluid leakage;

• the fluid level in the reservoir regularly decreases.

These symptoms do not always indicate a malfunction of the pump itself. The cause may also be hoses, seals, drive belt, steering gear, or insufficient fluid level, so before replacing the pump, it is advisable to check the entire system.

How to Properly Select a Power Steering Pump for Land Rover Defender

For accurate selection, consider:

1. model — Defender 90, 110, or 130;

2. year of manufacture;

3. engine type;

4. VIN and chassis number;

5. the presence of air conditioning if selecting a kit with a belt;

6. the OEM code of the old pump or the Land Rover catalog number.

The chassis number is especially important, as different pumps were used for early Defenders depending on the VIN range and engine number.

If the pump number is unknown, send us the VIN of the Land Rover Defender — we will check the compatibility and help you select the power steering pump and necessary components.